| INPUT | |
|---|---|
|
Voltage
|
205 to 264 VAC - 1 phase
|
|
Current
|
15.6 Amps @ 240 VAC
|
|
Power
|
3.7kVA
|
|
Frequency
|
50/60 Hz
|
| Output | |
|---|---|
|
Voltage
|
400 Vrms
|
|
Current
|
8 Amps
|
|
Power
|
2.25kW
|
|
Frequency
|
40 to 60 kHz
|
34” x 26” x 49.0-69.0” power supply on stand
16” x 26” x 12.5” power supply
| Environmental Conditions | |
|---|---|
|
Location
|
400 Vrms
|
|
Maximum Ambient Temperature
|
122° F (50° C)
|
|
Humidity
|
20% to 90% non-condensing
|
| Options | |
|---|---|
|
Wash down Capability
|
System designed to meet IP 65 specifications for foreign body and liquid protection.
|
|
Detection Package
|
Sensors provided to monitor stalled bottle, loose cap, and missing foil faults.
|
|
Reject Package
|
Solenoid, air cylinder, verification sensors, and mounting brackets provided to remove detected rejects from the conveyor onto a collection tray.
|
|
Incoming Stop
|
Solenoid, air cylinder, and mounting brackets provided to install in feed stop to prevent containers from traveling under the coil when the power supply is not in operation.
|
|
Remote Display
|
Operator display panel mounted in a stand alone enclosure for mounting in remote location.
|
|
Conveyor Package
|
Conveyor is attached to the portable stand. The conveyor is a 6’ long variable speed conveyor with a 4.5" belt.
|
|
External Control
|
Control output power level of the I-Foiler via an external analog signal from an external source.
|
|
Stack light
|
A tower light which is mounted to the back of the I-Foiler which indicates a Stop, Start, and Fault condition, including an alarm.
|